Eaton xiria series - Cross-section, single line diagram and list of functions

Xiria
994.570 G01 06
11
2.2 Cross-section, single line diagram and list of functions
1
Cable connected to the busbar
Cable connected to earth
Figure 2-1: Panel cross-sections and single line diagrams
1. Viewing window
2. Earth contact change-over switch
3. Busbar contact change-over switch
4. Main busbars
5. Change-over switch
6. Vacuum interrupter
7. Control panel
8. Cable connection
The position of the disconnector can be viewed via the
windows (1).
Functions, load-break switch panel
 Connect cable to busbar.
 Disconnect cable.
 Connect cable to earth.
 Test cable.
Functions, circuit-breaker panel
 Connect cable to busbar.
 Disconnect cable.
 Connect cable to earth.
 Protect outgoing feeder from overcurrents.
 Test cable.