Eaton xiria series - Page 36

Xiria
36
994.570 G01 06
Options
665417
Scissor type interlock, used in combination with a padlock inserted in the
access hole for the vacuum Interrupter. It prevents switching ON and it
prevents the operation of the change-over switch.
107926
Padlock, used in combination with the scissor type interlock and for
padlocking the earth interlock on the front.
107079
Warning sign, used when a panel is switched ON in earthed position and
any further manual operation is not allowed.
Rear cover, used when the switch room has no rear internal arc exhaust
channel.
E6055889
Adapter WIC1-PC3.
Used to connect the WIC1-1PE protection relay to a computer (laptop) via
a USB connection for setting the protection parameters or retrieving the
data stored in the relay memory. Including connection cables and
software.
E6055901
Tester type WIC1-TU.
Used for on site diagnostic test of the WIC1 protection relay.
E6046006
Phase sequence indicator type Orion 3.0.
Used for voltage test, phase sequence test and interface test of the
voltage detecting unit type WEGA. The WEGA units are used on Xiria
switchgear since December 2009.
E6046005
Phase sequence indicator type Orion Compare.
Simplified version of the Orion 3.0. Used for voltage test and phase
sequence test of the voltage detecting unit type WEGA. These voltage
indication units are used on Xiria switchgear since December 2009.
E6046007
Functional tester for WEGA voltage detecting units. The WEGA units are
used on Xiria switchgear since December 2009.