EBARA EV-PA 500 - User Manual

PM10U
EBARA
CORPORATION
Model EV-PA in this document is model code of Ebara.
Date Contents
2019/04/04 Initial Release
2019/04/19 Drawing update
2019/05/21 Front page module name
ISSUED BY PRECISION MACHINERY COMPANY
INSTRUCTION MANUAL
DRY VACUUM PUMP
MODEL EV-PA 250
MODEL EV-PA 500
Doc.No.7312-Z94024 Rev.2
CAUTION
Read and understand this INSTRUCTION MANUAL thoroughly before using
this equipment.
Keep this INSTRUCTION MANUAL on hand for future reference.
!
To Facility and Tool Manufactures:
Distribute this Instruction Manual to all end-user personnel actually operating
this equipment.

Summary

Product Description

Control System and Alarms

Details on the control system, warning, and alarm mechanisms.

Detailed Specifications

Technical specifications including pumping speed, pressure, weight, and power.

Installation

Installation Location and Environment

Piping and Connections

Electrical Wiring

Steps for safe and correct electrical connections, including power and control signals.

Control Panel

Control Panel Layout and Operation

LCD Display and Indications

Operation

Before Starting Procedures

Start and Stop Operations

Procedures for starting and stopping the pump.

Operation During Power Failure

Maintenance and Inspection

Routine Inspection

Repair and Servicing

Troubleshooting

Basic Troubleshooting Guide

Common issues and their corrective actions for the pump.

EBARA EV-PA 500 Specifications

General

Model	EV-PA 500
Category	Water Pump
Type	Submersible
Flow rate	Up to 24 m³/h
Maximum working pressure	8 bar
Max Flow Rate	500 l/min
Frequency	50 Hz
Impeller material	Stainless steel