11
6.8 Speed Limit Setting
6.9 Start-up Setting
6.10 Drive Mode Setting
08P is the speed limit setting. The adjustable
speed limit range is: 1~100km/h. (The
maximum adjustable speed limit varies by
dierent protocols).
09P is the start-up setting. The display can
choose the following start modes: 00 = zero
start, 01 = non-zero start.
10P is the drive mode setting. The available
drive modes are: 00 = Pedal assist only,
01 = Electric only, 02 = Both Pedal assist
and electric.
Press to enter the parameter changing
state. Press the / to select the
parameter and press to save theparameter
setting and return to the personalized
parameter setting interface.
Press to enter the parameter changing
state. Press the / to select the
parameter and press to save theparameter
setting and return to the personalized
parameter setting interface.
Press to enter the parameter changing
state. Press the / to select the
parameter and press to save theparameter
setting and return to the personalized
parameter setting interface.
Speed limit setting interface Start-up setting interface Drive mode setting interface
To Next Page
Loading...
Need help?
General
