14
In the password setting mode, the adjustable digit will ash. Press the / to select the
parameter and press to save the numbers and go to the next digit setting. Long press to
save the parameter setting and return to the personalized parameter setting interface after nish
setting the four digits in turn.
Power-on Password OFF
interface
Power-on Password
Activated interface
Restore Factory Default Settings Interface
Power-on password setting
interface
Shortcut Operation
7
7.1 Restore factory settings operation
dEF is the restore factory default parameter settings. dEF-Y is to restore default settings, and dEF-N is
not to restore.
Enter into the main setting interface and keep the speed at 0, press and hold and simultaneously
for 2 seconds to enter the restore factory default setting interface.
Pressing / to toggle to dEF-Y. Then after pressing to conrm, the display will show dEF-0
for a few seconds and then automatically start to restore the factory default settings. The display will
automatically exit to setting interface after the restoration.
To Next Page
Loading...
Need help?
General
