ECD CA-6 - .0.1 CA-6 Technical Specifications

2
0B1.0.1 CA-6 Technical Specifications
Analysis:
Colorimetric parameters
Method:
Photometric differential absorbance
Measuring range:
Contact factory for specific colorimetric measurements
Response time:
5-20 minutes cycle plus wait time depending on specific
measurements
Repeatability:
+/- 2% on absorbance value with sample turbidity < 80 NTU
Drift:
+/- 2% per month on the absorbance measurement
Power supply:
110-220Vac, 50-60 Hz 80 VA
Mounting:
Wall mounting or with optional bench support
Operating temperature:
5°C to 45°C (41-113
o
F)
Cabinet:
Cold Rolled steel, epoxy powder coated
Dimensions:
15”W x 24”H x 8.25”D (380mm W x 600mm H x 210mm D)
Weight:
Approx. 37lbs (19 kg)
Reagent consumption:
Contact factory for specific colorimetric measurements
Output:
4-20 mA, RS485, Optional Ethernet, Profibus
Alarms:
4 configurable relays
Sample
Inlet sample pressure:
Atmospheric
Outlet sample pressure:
Atmospheric, waste tubing ⅜” O.D. x ¼” I.D.
Sample flow for the fast loop
reservoir:
100-500 ml / min
Connections:
To the fast loop reservoir with flexible tubing ¼”O.D. x ⅛” I.D.