26
5.0 REAGENTS PREPARATION
Each analyte uses its own set of reagents to develop the distinctive color for measurement.
Use good laboratory technique. Wear safety goggles, gloves and protective clothing when preparing the
reagents, calibration solutions or cleaning solutions.
Mind all Hazard and Poison labels
Pre-made reagents and solutions are available from ECDA. Please contact the factory or your regional
distributor for more information. Several of the reagents are listed as Hazardous Shipping Materials;
these materials are only available for shipment domestically inside the USA.
Before proceeding with the analyzer Start-Up, check that all installation (Section 4.0)
operations have been properly completed. Please verify that all suggestions and
recommendations have been followed.
To Next Page
Loading...
