ECD SmartDRY SD-10 - Page 3

DECLARATION OF CONFORMITY
Electronic Controls Design, Inc.
4287-B S.E. International Way
Milwaukie, Oregon U.S.A. 97222-8825
(503) 659-6100 / (800) 323-4548
FAX: (503) 659-4422
Declaration of Conformity
Product:
SmartDRY™ SD-10 & SD-10SB
Part Number:
E55-7310-30/35
E58-7310-60/65
SmartDRY™ SD-30 & SD-10SB
E55-7330-30/35
E57-7339-30/35
SmartDRY™ SD-48F & SD-30XD
E55-7483-30/35
E57-7489-30/35
The undersigned hereby declares, on behalf of the ECD Inc., that the above-referenced product, to which this declara-
tion relates, is in conformity with the provisions of:
SAFTEY:
IEC 61010-1 “Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General require-
ments”
EMISSIONS:
EN 61000-3-2:2014 “Electromagnetic Compatibility (EMC) - Limits For Harmonic Current Emissions …”
EN 61000-3-3:2013 “Electromagnetic Compatibility (EMC) - Limitation of voltage changes, voltage fluctuations and flicker …”
EN 61000-6-4:2007+A1:2011 Class A “Electromagnetic compatibility (EMC) - Emission standard for industrial
environments”
FCC 15.107:2015 Class A “Conducted Limits”
FCC 15.109(g):2015 Class A “Radiated emission limits”
ICES-003:2012 Class A “Information Technology Equipment (ITE) – Limits”
IMMUNITY:
EN 61000-6-1:2007 “Electromagnetic Compatibility (EMC). Immunity for residential, commercial and light-industrial environments”
The Technical Construction File required by this Directive is maintained at the corporate headquarters of ECD, Inc.
Name:
Paul Austen
Position:
Senior Project Engineer
Signature:
Date:
August, 2015