SD Series Dry Cabinets Setup and Operation Manual | A55-7379-00 Rev: 2.0.0 Page 30
7.3 SETUP
1. Connect the SmartDRY™ to the Network via cable. SmartDRY™ acquires an IP Address from the Net-
work. This will then be the URL Address for the SmartDRY™ Network.
2. Get SmartDRY™ IP address assigned by your Network.
a. From the SmartDRY™ Control Panel:
i. Select Menu > Other Settings.
ii. Scroll down to the Network Menu and Press OK.
iii. Log and use the assigned SmartDRY™ IP address as the web address for your web browser to
access SmartDRY™ Network. For example: http://10.1.1.999.
7.4 VIEWING INITIAL SMARTDRY™ DATA
1. On initial load of your SmartDRY™ Network using your SmartDRY™ IP address, you’ll be able to view
current state of your SmartDRY™ Cabinet.
a. Graph:
i. Display RH, Temperature, Door Activity Graph.
b. Real Time Status
i. RH, Temperature, Door Activity.
ii. Color Indicators: (Red, Yellow, Green, White)
iii. Events:
1. Door Open
iv. SmartDRY™ Status and Settings:
1. SmartDRY™
2. SmartBAKE™
v. Alarms
vi. Fan and Desiccant Indicators.
To Next Page
Loading...
