Need help?Do you have a question about the ECD SmartDRY SD Series and is the answer not in the manual?
Steps for inspecting for visible and concealed damage upon delivery.
Procedures for return shipments and verifying included accessories.
Explains symbols used on the product itself.
Explains symbols displayed on the control panel interface.
Explains symbols used within the manual for warnings and notes.
Guidelines for safe power connection and optimal cabinet placement.
Procedures for lifting, handling, and leveling the cabinet.
Steps for installing optional accessories like reel racks and light towers.
Overview of the main display, current readings, and status indicators.
How to access menus, use navigation buttons, and system controls.
Managing alarms, muting sound, and controlling interior lighting.
Introduction to the network dashboard for monitoring cabinet data remotely.
Details on configuring SmartDRY™, SmartBAKE™, and other system settings.
Steps for network connection and viewing initial cabinet data.
Basic steps for safety, location, power, and initial configuration.
Procedures for setting time and clearing stored data history.
Accessing the SmartDRY™ menu and setting the RH setpoint.
Setting and managing RH and Temperature alarms in SmartDRY™ mode.
Configuring optional SmartBAKE™ features and other system parameters.
Guidelines for cleaning the cabinet and protecting the humidity sensor.
Steps for replacing clock battery, dryer, power board, probe, heater, switch, and light tower.
Solutions for main display issues and failure to achieve setpoints.
Understanding system alerts and procedures for firmware updates.
Performing system resets and how to contact ECD support.
List of available accessories and replaceable parts with part numbers.
Technical specifications for different SmartDRY™ cabinet models.
Electrical schematics for the 3D-10/10SB and 3D-30/30XD models.
Definitions of technical terms used in the manual.
To Next Page
General