SD Series Dry Cabinets Setup and Operation Manual | A62-3337-00 Rev: 1.0.0 Page 63
9.3.5 SENSOR
The RH/Temperature probe is calibrated independent of the ECD SmartDRY™ Cabinet. It's calibration con-
stants and serial number are stored in the probe itself. These settings can be viewed here.
To access the RH/Temp Sensor Settings:
1) From the Main Display, enter the Main menu by pressing the Menu button. enter the Other Settings
menu by pressing the Settings button.
To Next Page
Loading...
Need help?
General
