To Next Page

To Previous Page

SD Series Dry Cabinets Setup and Operation Manual | A62-3337-00 Rev: 1.0.0 Page 27

7.3 SETUP

1. Connect the ECD SmartDRY™ Cabinet to the Network via cable. SmartDRY™ acquires an IP Address

from the Network. This will then be the URL Address for the SmartDRY™ Network.

2. Get IP address assigned by your Network.

a. From the ECD SmartDRY™ Control Panel:

i. Select Menu > Other Settings.

ii. Scroll down to the Network Menu and Press OK.

iii. Log and use the assigned IP address as the web address for your web browser to access

SmartDRY™ Network. For example: http://10.1.1.999.

7.4 VIEWING INITIAL ECD SMARTDRY™ DATA

1. On initial load of your SmartDRY™ Network using your IP address, you’ll be able to view current state

of your Cabinet.

a. Graph:

i. Display RH, Temperature, Door Activity Graph.

b. Real Time Status

i. RH, Temperature, Door Activity.

ii. Color Indicators: (Red, Yellow, Green, White)

iii. Events:

1. Door Open

iv. ECD SmartDRY™ Status and Settings:

1. SmartDRY™

2. SmartBAKE™

v. Alarms

vi. Fan and Desiccant Indicators.

Questions and Answers:

Need help?

Do you have a question about the ECD SmartDRY SD Series and is the answer not in the manual?

ECD SmartDRY SD Series Specifications

General