To Next Page

To Previous Page

SD Series Dry Cabinets Setup and Operation Manual | A62-3337-00 Rev: 1.0.0 Page 72

10.2 ECD SMARTDRY™ HUMIDITY AND TEMPERATURE SENSOR

This sensor is a highly accurate environmental sensors. Exposing the sensor to the following can cause drift of

the humidity reading – irreversibly in most cases. The list below are examples and do not represent a com-

plete list of possible harmful substances, but are the most common used in electronic manufacturing.

Do not allow the sensor to be exposed to:

• Solvents or other organic compounds including: Ketenes, Acetone, Ethanol, Isopropyl Alcohol, Tolu-

ene, etc.

• Acids and bases including: HCl, H2SO4, HNO3, NH3 etc.

• Ozone in high concentration or H2O2

• Cleaning agents or strong air blasts from an air-gun.

Please note that such chemicals are contained in uncured epoxies, glues, adhesives, etc. and out-

gas during baking and curing. Do not use the ECD SmartDRY™ Cabinet as a curing chamber for

these processes. These chemicals are also added as plasticizers in plastics, used for packaging ma-

terials, and may also out gas for some time. Only allow well cured approved Moisture Barrier Bag

to be use in the Cabinet.

Questions and Answers:

Need help?

Do you have a question about the ECD SmartDRY SD Series and is the answer not in the manual?

ECD SmartDRY SD Series Specifications

General