To Previous Page

SD Series Dry Cabinets Setup and Operation Manual | A55-7379-00 Rev: 2.0.0 Page 99

Setup:

1. Connect the SmartDRY™ to the Network via cable. SmartDRY™ acquires an IP Address from the Net-

work. This will then be the URL Address for the SmartDRY™ Network.

2. Get SmartDRY™ IP address assigned by your Network.

a. From the SmartDRY™ Control Panel:

i. Select Menu > Other Settings.

ii. Scroll down to the Network Menu and Press OK.

iii. Log and use the assigned SmartDRY™ IP address as the web address for your web browser to

access SmartDRY™ Network. For example: http://10.1.1.999.

Viewing initial SmartDRY™ data:

1. On initial load of your SmartDRY™ Network using your SmartDRY™ IP address, you’ll be able to view

current state of your SmartDRY™ Cabinet.

a. Graph:

i. Display RH, Temperature, Door Activity Graph.

b. Real Time Status

i. RH, Temperature, Door Activity.

ii. Color Indicators: (Red, Yellow, Green, White)

iii. Events:

1. Door Open

iv. SmartDRY™ Status and Settings:

1. SmartDRY™

2. SmartBAKE™

v. Alarms

vi. Fan and Desiccant Indicators

Questions and Answers:

Need help?

Do you have a question about the ECD SmartDRY SD-10 and is the answer not in the manual?

ECD SmartDRY SD-10 Specifications

General