ECD SmartDRY SD-30 User Manual

SD Series Dry Cabinets Setup and Operation Manual | A55-7379-00 Rev: 2.0.0 Page 52
9.3.7 PASSCODE
The Passcode can be changed to prevent unauthorized changes to the programming of the SmartDRY™ Cabi-
net. You need the default Passcode listed in the beginning of this section to make this change.
To access the Passcode settings:
1) From the Main Display, enter the Main menu by pressing the Menu button. Enter the Other Settings
menu by pressing the Settings button.
2) Enter the Passcode Settings by pressing the Passcode button. Select the Passcode field to make active.
Use the Up or Down button to adjust the desired value. Once completed, select the OK button to ac-
cept the new value.
3) Select the ON/OFF toggle and OK button to make active.

ECD SmartDRY SD-30 Specifications

General

Brand	ECD
Model	SmartDRY SD-30
Category	Dryer
Language	English