35
Specifications
These specifications are subject to change without notice.
The declared vibration total value has been measured in accordance with a standard test method and may be used for com-
paring one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
DCS-2500
Mass:
without battery, guide bar, saw chain and chain oil kg 2.0
with battery, guide bar, saw chain and chain oil kg 3.5
External Dimensions:
length × width × height (with battery) mm 424 × 189 × 219
Volume:
Tank for chain lubrication oil cm
3
(mL) 120
Oil (Chain oil) ECHO recommended chain oil or equivalent
Cutting length:
All specified usable cutting lengths of guide bar cm 20, 25, 30
Chain:
Specified pitch mm 8.26 (0.325 inch) 6.35 (1/4 inch)
Specified gauge (thickness of drive links) mm 1.09 (0.043 inch) 1.09 (0.043 inch)
Guide bar length cm 25, 30 (ECHO) 20, 25, 30 (ECHO)
Guide bar gauge mm 1.09 (0.043 inch) 1.09 (0.043 inch)
Type of chain Oregon 80TXL SUGIHARA A4S
Chain speed at maximum motor speed m/s 19.3 16.9
Lubrication mm Automatic oil pump
Sprocket:
Specified number of teeth 7 8
Specified pitch mm 8.26 (0.325 inch) 6.35 (1/4 inch)
Battery: LBP-50-150
Type Li-Ion
Pack voltage V 56 (rated 50.4)
Charger: LCJQ-560 LCJU-560
Charger input voltage V AC 220 - 240 AC 220 - 240
Charge Time (approximately) min 47 47
Charger Lights: Red LED – Battery is outside charging temperature
range
Red LED Blinking – Fault
Green LED – Battery finished charging
Green LED Blinking – Battery is charging normally
Sound Pressure Level: (EN62841-4-1) dB(A) 72.4
Sound Power Level: (EN62841-4-1) dB(A) 92.4
Uncertainty dB(A) 3.0
Vibration levels: (EN62841-4-1)
Front handle m/s² 3.8
Rear handle m/s² 2.1
Uncertainty: K m/s² 1.5
To Next Page
Loading...
Need help?
General