34
Storage / Disposal procedure
Storage
Chain Saw
Do not store your unit without performing protective storage
maintenance which includes the following:
1. Turn power to unit off.
2. Remove battery from chain saw.
3. Remove accumulation of dirt and debris from exterior of unit.
4. Tighten all screws and nuts.
5. Install guide bar cover.
6. Cover battery compartment of chain saw.
7. Store unit in a dry, dust-free place, out of the reach of chil-
dren.
8. Store unit in temperatures between 0°C (32°F) and 40°C
(104°F).
Battery
1. Remove battery from chain saw.
2. Store in a dry, dust-free place, out of the reach of children.
3. Store in temperatures between 0°C (32°F) and 40°C
(104°F).
4. If battery is stored for longer than one year, charge it to ap-
proximately 40 - 60% capacity and store in temperatures be-
tween 10°C (50°F) and 30°C (86°F).
Charger
1. Remove battery from charger.
2. Disconnect charger from power supply.
3. Store in a dry, dust-free place, out of the reach of children.
Disposal procedure
Major plastic parts making up the product have codes showing
their materials.
The codes refer to the following materials; dispose of those
plastic parts in accordance with local regulations.
Battery contains lithium. Dispose of only at a designated col-
lection point.
Lithium-ion batteries must disposed of properly.
Please contact your ECHO dealer in case you do not know
how to dispose of or recycle waste plastic parts.
WARNING
Do not store in an enclosure where combustible fumes may accumulate.
You could cause a fire.
When storing the product for long periods of time, ensure that the following preparations for storage are carried out.
1. Battery compartment 2. Guide bar cover
Mark Material
>PA6-GF< Nylon 6 - Glass fibre
>PA66-GF< Nylon 66 - Glass fibre
>PP-GF< Polypropylene - Glass fibre
>PE-HD< Polyethylene
>POM< Polyoxymethylene
To Next Page
Loading...
Need help?
General