Echo DCS-2500

36
Declaration of conformity
The undersigned manufacturer:
YAMABIKO CORPORATION
1-7-2 SUEHIROCHO
OHME; TOKYO 198-8760
JAPAN
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Declares that the hereunder specified new unit:
BATTERY CHAIN SAW
Brand: ECHO
Type: DCS-2500
Complies with:
* The requirements of Directive 2006/42/EC (use of harmonized standard EN 62841-1:2015, EN 62841-4-1:2020)
* The requirements of Directive 2014/30/EU (use of harmonized standard EN 55014-1:2017+A11:2020, EN 55014-
2:2015)
* The requirements of Directive 2011/65/EU (use of harmonized standard EN IEC 63000:2018)
* The requirements of Directive 2000/14/EC
Conformity assessment procedure followed ANNEX V
Measured sound power level: 98 dB(A)
Guaranteed sound power level: 101 dB(A)
DCS-2500
Serial Number E81535001001 to E81535100000
Tokyo, July 19, 2023
YAMABIKO CORPORATION
The authorized representative in Europe who is authorized to
compile the technical file:
Company: CERTIFICATION EXPERTS B.V.
Address: Amerlandseweg 7, 3621 ZC Breukelen,
The Netherlands
Katsunori Kon
General Manager
Quality Assurance Dept.
Mr. Richard Glaser