1 Description.........................................6
1.1 Purpose.............................................................. 6
1.2 Overview........................................................... 6
2 General power tool safety
warnings.............................................6
2.1 Work area safety................................................ 6
2.2 Electrical safety................................................. 6
2.3 Personal safety...................................................6
2.4 Power tool use and care.....................................7
2.5 Battery tool use and care................................... 7
2.6 Service............................................................... 7
3 Chainsaw safety warnings................ 7
4 Prevent operator kickback...............8
5 Symbols on the product.................... 8
6 Risk levels...........................................9
7 Recycle................................................9
8 Installation......................................... 9
8.1 Unpack the machine.......................................... 9
8.2 Add the bar and chain lubricant.........................9
8.3 Assemble the guide bar and the chain............. 10
8.4 Install the battery pack.....................................10
8.5 Remove the battery pack................................. 10
9 Operation......................................... 10
9.1 Examine the chain lubrication......................... 10
9.2 Hold the machine.............................................10
9.3 Start the machine............................................. 10
9.4 Stop the machine............................................. 10
9.5 Operate the chain brake................................... 11
9.6 Non-manual chain brake..................................11
10 Cutting instruction.......................... 11
10.1 General.............................................................11
10.2 Fell a tree......................................................... 11
10.3 Limb a tree.......................................................12
10.4 Buck a log........................................................12
10.5 Tension and compression in timber................. 12
11 Maintenance.....................................12
11.1 Adjust the chain tension.................................. 13
11.2 Sharpen the cutters...........................................13
11.3 Guide bar maintenance.................................... 13
12 Transportation and storage............13
13 Troubleshooting...............................14
14 Technical data..................................15
15 EC Declaration of conformity........15
16 UK Declaration of conformity........15
5
English (Original Instructions)
EN