Echo GT-225 User Manual

OPERATION GT-225
24 X7732273904
© 04/21 ECHO Incorporated
Starting Cold Engine
The attachment will operate immediately when the engine
starts, and could result in possible serious injury. Keep
movable parts of the attachment away from objects that could
become entangled or thrown, and surfaces that could cause
loss of control.
1. Stop Switch
Move stop switch (A) away from
the STOP position.
2. Choke
Move choke (B) to COLD
START ( ) (closed) position.
3. Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional 4 or 5 times.
4. Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly
grasp throttle handle with left
hand and fully depress throttle
trigger to wide open position.
Rapidly pull recoil starter
handle/rope (D) until engine
fires (or maximum five pulls).
A
C
B
D

Echo GT-225 Specifications

General

Engine Displacement	21.2 cc
Shaft Type	Straight
Engine Type	2-stroke
Handle Type	Loop
Fuel Capacity	14.9 fl. oz.
Weight	10.1 lbs
Cutting Swath	16 inches