Echo GT-225 User Manual

MAINTENANCE GT-225
32 X7732273904
© 04/21 ECHO Incorporated
Cooling System
Level 2.
To maintain proper engine operating temperatures, cooling air must
pass freely through the cylinder fin area. This flow of air carries
combustion heat away from the engine.
Overheating and engine seizure
can occur when:
• Air intakes are blocked,
preventing cooling air from
reaching the cylinder.
• Dust and grass build up on the
outside of the cylinder. This
build up insulates the engine
and prevents the heat from
leaving.
Removal of cooling passage
blockages or cleaning of cooling fins is considered “Normal Maintenance.”
Any failure attributed to lack of maintenance is not warranted.
1. Remove spark plug lead.
2. Close choke (COLD START
[ ] position). This prevents
dirt from entering the
carburetor throat when the air
filter is removed. Remove air
cleaner cover (A).
3. Remove engine cover (B).
A
B

Echo GT-225 Specifications

General

Engine Displacement	21.2 cc
Shaft Type	Straight
Engine Type	2-stroke
Handle Type	Loop
Fuel Capacity	14.9 fl. oz.
Weight	10.1 lbs
Cutting Swath	16 inches