OPERATION GT-225
26 X7732273904
© 04/21 ECHO Incorporated
3. Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly grip
throttle handle with left hand.
Rapidly pull recoil starter
handle/rope (D) until engine
fires.
Note: If engine does not start
after 5 pulls, use Cold
Start Procedure.
Stopping Engine
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using unit
again.
1. Throttle
Release throttle and allow
engine to return to idle before
shutting off engine.
The cutting attachment will continue to rotate even after the
throttle is released, maintain control of the unit until it has come
to a complete stop
2. Stop Switch
Move stop switch (A) to STOP position.
To Next Page
Loading...
