EasyManuals Logo

Echo PAS-225 Pro Attachment Series User Manual

Echo PAS-225 Pro Attachment Series
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
OPERATION PAS-225
28 X7732274303
© 01/2020 ECHO Incorporated
Starting Warm Engine
The starting procedure is the same as Cold Start except DO NOT close the
choke, and do not hold throttle trigger fully depressed.
The attachment should not move at idle, otherwise serious
personal injury may result.
Note: If attachment moves, readjust carburetor according to
“Carburetor Adjustment” instructions in this manual or see
your ECHO Dealer.
1. Stop Switch
Move stop switch button (A)
forward away from the STOP
position.
2. Purge Bulb
Pump purge bulb (C) until fuel is
visible in the “Clear” fuel return
line. Pump bulb an additional 4
or 5 times.
A
C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo PAS-225 Pro Attachment Series and is the answer not in the manual?

Echo PAS-225 Pro Attachment Series Specifications

General IconGeneral
Engine Displacement21.2 cc
Shaft Length59 in
Starting Systemi-30™ starting system
Attachment CapableYes
Engine Type2-stroke
Shaft TypeStraight
Cutting Swath17 in
Line Diameter0.095 in
Fuel Capacity14.9 fl. oz.

Related product manuals