EasyManuals Logo

Echo PAS-225 Pro Attachment Series User Manual

Echo PAS-225 Pro Attachment Series
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
MAINTENANCE PAS-225
32 X7732274303
© 01/2020 ECHO Incorporated
Air Filter
Level 1.
1. Close choke (COLD START position). This prevents dirt from entering
the carburetor throat when the air filter is removed. Brush accumulated
dirt from air cleaner area.
2. Remove air filter cover. Brush
dirt from inside cover.
3. Replace filter if it is damaged,
fuel soaked, very dirty, or the
rubber sealing edges are
deformed.
Lightly brush debris from
filter.
Soak heavily soiled filters in
water/detergent solution to
loosen dirt, then brush
lightly.
Rinse with clean water and
allow to dry completely before reuse.
4. Install air filter in air filter case.
5. Install air filter cover.
Parts Required: Tune-Up Kit

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo PAS-225 Pro Attachment Series and is the answer not in the manual?

Echo PAS-225 Pro Attachment Series Specifications

General IconGeneral
Engine Displacement21.2 cc
Shaft Length59 in
Starting Systemi-30™ starting system
Attachment CapableYes
Engine Type2-stroke
Shaft TypeStraight
Cutting Swath17 in
Line Diameter0.095 in
Fuel Capacity14.9 fl. oz.

Related product manuals