EasyManuals Logo

Echo PAS-225 Pro Attachment Series User Manual

Echo PAS-225 Pro Attachment Series
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
PAS-225 MAINTENANCE
X7732274303 33
© 01/2020 ECHO Incorporated
Fuel Filter
Level 1.
Fuel is VERY flammable. Use extreme care when mixing, storing
or handling, or serious personal injury may result.
1. Use a clean rag to remove
loose dirt from around fuel
cap and empty fuel tank.
Do not damage fuel line while removing fuel filter from tank or line.
2. Pull the fuel filter from the tank.
3. Do not remove the wire coil clamp to remove the fuel filter. Pinch the
fuel filter with the fingers on one hand and the fuel line with the other
hand. Pull and twist slightly to separate.
4. Install the new filter with the reverse action.
Note: Federal EPA regulations require all model year 2012 and later
gasoline powered engines produced for sale in the United
States to be equipped with a special low permeation fuel
supply hose between the carburetor and fuel tank. When
servicing model year 2012 and later equipment, only fuel
supply hoses certified by EPA can be used to replace the
original equipment supply hose. Fines up to $37,500 may be
enforced for using an un-certified replacement part.
Parts Required: TUNE UP KIT.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo PAS-225 Pro Attachment Series and is the answer not in the manual?

Echo PAS-225 Pro Attachment Series Specifications

General IconGeneral
Engine Displacement21.2 cc
Shaft Length59 in
Starting Systemi-30™ starting system
Attachment CapableYes
Engine Type2-stroke
Shaft TypeStraight
Cutting Swath17 in
Line Diameter0.095 in
Fuel Capacity14.9 fl. oz.

Related product manuals