16
EQUIPMENT CHECK
Before operation a complete check of the unit and attachment must be
performed;
• Check for loose/missing nuts, bolts and screws. Tighten and/or
replace as needed.
• Inspect fuel lines, tank and area around carburetor for fuel leaks. DO
NOT operate unit if leaks are found.
• Check that the attachment is firmly attached and in safe operating
condition.
• Check that front handle is adjusted for safe, comfortable operation.
See Assembly for proper adjustment.
DETERMINE OPERATION AREA
WARNING DANGER
Inspect starting area for hazards such as rocks, glass, debris etc.
which could be thrown by the cutting attachment when starting.
Keep helpers and bystanders at least 15m (50 ft) from starting area,
otherwise serious personal injury may result.
• Spectators and fellow workers must be warned, and children and
animals prevented from coming nearer than specified in the attach-
ment Operator's Manual or Safety Manual. If unsure keep people
and pets away 15 m (50 ft.).
15 m
(50 ft.)
To Next Page
Loading...
Need help?
General
