DPAS-2100
9992223804746
© 12/2022 ECHO Incorporated
1. Press top of locking tabs (A) on
both sides of Speed-Feed® head
to release cover (B) from eyelet
carrier (C).
2. Remove cover from eyelet carrier.
A
B
C
AA
MAINTENANCE
Sharpening Metal Blades
Metal blades are very sharp and can cause severe injuries, even if unit is
off and blades are not moving. Avoid contact with blades. Wear gloves to
protect hands.
Nylon Line Head Disassembly Instructions
Note: For normal use, Speed-Feed® head disassembly is not necessary.
However, if circumstances require disassembly, follow these instructions.
To Next Page
Loading...
Need help?
General
