Echo SRM-266 User Manual

SRM-266
OPERATION
X7502028004 27
© 02/21 ECHO Incorporated
Starting Cold Engine
The attachment will operate immediately when the engine
starts, and could result in possible serious injury. Keep
movable parts of the attachment away from objects that could
become entangled or thrown, and surfaces that could cause
loss of control.
1. Stop Switch
Move stop switch button (A)
forward, away from the STOP
position.
2. Choke
Move choke lever (B) to COLD
START ( ) position.
3. Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional 4 or 5 times.
4. Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly
grasp throttle handle and throttle
trigger lockout with left hand and
fully depress throttle trigger to
wide open position. Rapidly pull
recoil starter handle/rope (D)
until engine fires (or maximum
five [5] pulls).
A
C
B
D

Echo SRM-266 Specifications

General

Engine Displacement	25.4 cc
Fuel Capacity	16.9 fl. oz.
Cutting Swath	17 inches
Shaft Type	Straight
Starting System	i-30™ starting system
Engine Type	2-stroke
Warranty	2 years