EasyManuals Logo

Echo SRM-266 User Manual

Echo SRM-266
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
MAINTENANCE
SRM-266
36 X7502028004
© 02/21 ECHO Incorporated
Fuel Filter
Level 1.
Fuel is VERY flammable. Use extreme care when mixing, storing
or handling, or serious personal injury may result.
1. Use a clean rag to remove loose
dirt from around fuel cap and
empty fuel tank.
Do not damage fuel line while removing fuel filter from tank or line.
2. Pull the fuel filter from the tank.
3. Do not remove the wire coil clamp to remove the fuel filter. Pinch the
fuel filter with the fingers on one hand and the fuel line with the other
hand. Pull and twist slightly to separate.
4. Install the new filter with the reverse action.
Note: Federal EPA regulations require all model year 2012 and later
gasoline powered engines produced for sale in the United
States to be equipped with a special low permeation fuel
supply hose between the carburetor and fuel tank. When
servicing model year 2012 and later equipment, only fuel
supply hoses certified by EPA can be used to replace the
original equipment supply hose. Fines up to $37,500 may be
enforced for using an un-certified replacement part.
Parts Required: TUNE UP KIT.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo SRM-266 and is the answer not in the manual?

Echo SRM-266 Specifications

General IconGeneral
Engine Displacement25.4 cc
Fuel Capacity16.9 fl. oz.
Cutting Swath17 inches
Shaft TypeStraight
Starting Systemi-30™ starting system
Engine Type2-stroke
Warranty2 years

Related product manuals