Echo SRM-266 User Manual

SRM-266
MAINTENANCE
X7502028004 41
© 02/21 ECHO Incorporated
1. Check idle speed and reset if
necessary. If a tachometer is
available, idle speed screw (A)
should be set to the
specifications found on
“Specifications” page of this
manual. Turn idle screw (A)
clockwise to increase idle speed;
counterclockwise to decrease
idle speed.
When carburetor adjustment is completed, the cutting
attachment should not move at idle, otherwise serious personal
injury may result.
Lubrication
Level 1.
Parts Required: Lithium Based Grease.
Gear Case
Gear cases without grease plug (A) do not require lubrication.
1. Clean all loose debris from gear
case.
2. Remove plug (A) and check level
of grease.
3. Add grease if necessary. DO
NOT over-fill.
A
A

Echo SRM-266 Specifications

General

Engine Displacement	25.4 cc
Fuel Capacity	16.9 fl. oz.
Cutting Swath	17 inches
Shaft Type	Straight
Starting System	i-30™ starting system
Engine Type	2-stroke
Warranty	2 years