Echo SRM-266 User Manual

MAINTENANCE
SRM-266
44 X7502028004
© 02/21 ECHO Incorporated
4. Hold trimmer head while
turning knob clockwise to wind
line onto spool until about 13
cm (5 in.) of each line remains
exposed.
Trimmer head is now fully loaded
and ready for operation.
When the wear indicators
located at the bottom of the
Speed-Feed
®
head are worn
smooth, or if holes appear,
replacement of the cover or the
entire Speed-Feed
®
head is
required.
Sharpening Metal Blades
Several styles of metal blades are
approved for use on the Brushcutter.
The 8-tooth blade can be sharpened
during normal maintenance. The
clearing blade and 80-tooth blade
require professional service.
Before sharpening, CLOSELY
inspect blade for cracks (look at the
bottom of each tooth and the center
mounting hole closely), missing
teeth and bending. If ANY of these
problems are discovered, replace
the blade.

Echo SRM-266 Specifications

General

Engine Displacement	25.4 cc
Fuel Capacity	16.9 fl. oz.
Cutting Swath	17 inches
Shaft Type	Straight
Starting System	i-30™ starting system
Engine Type	2-stroke
Warranty	2 years