Eclipse AVN4430 - Playing the VTR; Changing the VTR Setting Screen; Turning off the VTR

77
77
● The VTR screen appears.
● Touch the screen to change to the VTR
operation screen.
● Changing to the VTR operation screen
displays each touch switch for
approximately 6 seconds.
● If you touch on the VTR operation
screen, the video is displayed again.
ATTENTION
● Whether or not the video is displayed
correctly depends on the connected
equipment.
● If you have attached your iPod using the
iPod cable (iPC-409), this iPod connection
has the priority and you cannot use the VTR
mode. To use the VTR, unplug the iPod
cable first.
● This returns to the VTR operation screen.
Playing the VTR
1
Press the [SRC] button repeatedly
until “VTR” is displayed on the sub-
display.
Changing the VTR
Setting Screen
1
Touch .
2
Touch , or .
Turning Off the VTR
1
Hold down the [SRC] button for 1 or
more seconds.
Done
Display
16:9 4:3 Zoom