86
86
About the Steering Wheel Switches
Others
● A function is selected in the following
sequence each time you press the button.
TRACK UP Q TRACK DOWN Q VOL UP
Q VOL DOWN Q MODE Q MUTE Q PWR
Q OTHERS ...
● When the function is set correctly, “OK” is
displayed.
ATTENTION
If “NG” is shown on the display, once again
select a desired function to set.
6
Press the [BAND] button.
7
Hold down the steering wheel switch
button you wish to store in memory,
and simultaneously press the [CTRL]
button more than two seconds.
8
Assign the desired functions to the
steering wheel switch buttons by
repeating Steps 5 through 7.
9
When you have set all functions, hold
down the [BAND] button.
To Next Page
Loading...
