Ecolab Aquanomic - Page 22

22
Quick Setup #2.0
1. SELECT LOCATION NORTH AMERICA
2. Unit of Measure Standard
3. Number of WEs 3
4. Date & Time
5. Can customer prime? No
6. Product Pickup Probe Standard
7. Alarm Volume 5
8. Alarm Mute Time 2.5
1. SELECT LOCATION EUROPE
Quick Setup>Select Location #2.1
1. NORTH AMERICA
2. Europe
3. APLA
2. EUROPE
2.2.2 Submenu #2.2 Quick Setup>Unit of Measure:
Select the desired UOM with the suggested Date & Time format.
▪ Standard UOM: - weight will be edited, saved, and displayed in OZ and LB
- Date is displayed in Month-Day-Year (MM DD YYYY) format
▪ Metric: - weight will be edited, saved, and displayed in mL and Kg
- Date is displayed in Day-Month-Year (DD MM YYYY) format
Press SK#3 <Save> to save selection. Press <Back> to cancel selection and return to previous screen.
Quick Setup #2.0
1. Select Location North America
2. Unit of Measure Standard
3. Number of WEs 3
4. Date & Time
5. Can customer prime? No
6. Product Pickup Probe Standard
7. Alarm Volume 5
8. Alarm Mute Time 2.5
Quick Setup>Unit of Measure #2.2
1. STANDARD: OZ/LB MMDDYYYY
2. Metric: mL/Kg DDMMYYYY
2. UNIT OF MEASURE STANDARD
1. STANDARD: OZ/LB MMDDYYYY
2.2.3 Submenu #2.3 Quick Setup>Number of WEs:
Set the number of washers (maximum = 3) installed at this account.
Use the Left/Right arrow keys to select the desired number (1 - 3).
Press SK#3 <Save> to save selection. Press <Back> to cancel selection and return to previous screen.
Quick Setup #2.0
1. Select Location North America
2. Unit of Measure Standard
3. Number of WEs 3
4. Date & Time
5. Can customer prime? No
6. Product Pickup Probe Standard
7. Alarm Volume 5
8. Alarm Mute Time 2.5
Quick Setup>Number of Washer #2.3
3
3. NUMBER OF WES 3
2.2.4 Submenu #2.4 Quick Setup>Date & Time:
Set up installation Date and Time in the UOM format previously selected.
Use Left/Right keys to move between fields.
Use Up/Down keys at each field location to set the numeric values and to toggle between am/pm in Time setup.
Press SK#3 <Save> to save selection. Press <Back> to cancel selection and return to previous screen.