Ecolab Aquanomic - Page 29

29
Submenu #3.1.1.9 System Menu>Washer 1>WE Formula Reset Option:
When this option is enabled, the washer formula will reset to the previously selected formula.
The Default setup is ‘No’. Press <Back> to cancel selection. Press SK#3 <Save> to save selection.
System Menu >Washer 1 #3.1.1
1. WE Name
2. Capacity
3. Chart Stop
4. Additional Post Flush Time
5. WE Signal Filter Time
6. WE Signal Mode
7. WE Formula Reset Option
7. WE FORMULA RESET OPTION
...Menu>Washer 1>WE Formula Reset Option#3.1.1.9
1. No
2. Yes
1. NO
2.3.2 Submenu #3.2 System Menu>Detergent:
Select the detergent product and change the product factor.
System Menu #3.0
1. Washer Settings
2. Detergent
3. Bleach
4. Finish
5. Optional Form Select
6. Optional Solid Product4
7. Optional Liquid Product
8. Select Textile Type
9.Reset Setup Menu
10. Reset All
2. DETERGENT
Setup Menu>Detergent #3.2
Current Product: Surge Plus
1. Change Detergent
2. Change Product Factor
1. CHANGE DETERGENT
Submenu #3.2.1 Setup Menu> Detergent >Change Detergent:
Change detergent product.
Press SK#3 <Save> to save selection. Press <Back> to cancel selection.
Setup Menu>Detergent #3.2
Current Product: Surge Plus
1. Change Detergent
2. Change Product Factor
1. CHANGE DETERGENT
Setup Menu>Change Detergent #3.2.1
1. Surge Plus
2. Dual Surge
3. LT Detergent
1. SURGE PLUS
Submenu #3.2.2 Setup Menu> Detergent >Change Product Factor:
Change the selected detergent product factor.
Press SK#3 <Save> to save selection. Press <Back> to cancel selection.
Setup Menu>Detergent #3.2
Current Product: Surge Plus
1. Change Detergent
2. Change Product Factor
2. CHANGE PRODUCT FACTOR
Setup Menu>Detergent>Change Product Factor #3.2.2
4 4 1 3 7 7 5 1 2 8 0 7 1 0 6 0 5 6
(Use Left/Right/Up/Down to change)
4
2.3.3 Submenu #3.3 System Menu>Bleach:
Select the bleach product and change the product factor