Setup Menu >Optional Liquid Product #3.7
1. No
2. Yes
2. YES
System Menu>Choose Product #3.7.1
1. Washer 1 Pump1
2. Washer 2 Pump2
3. Washer 3 Pump3
1. WASHER 1 PUMP1
System Menu>Choose Product #3.7.1
1. Washer 1 Unmapped
2. Washer 2 Unmapped
3. Washer 3 Unmapped
1. WASHER 1 UNMAPPED
System Menu>Choose Product>washer 1 #3.7.1.1
1. Pump 1
2. Pump 2
3. Pump 3
1. PUMP 1
System Menu>Choose Product #3.7.1
1. Washer 1 Unmapped
2. Washer 2 Unmapped
3. Washer 3 Unmapped
1. WASHER 1 UNMAPPED
2.3.8 Submenu #3.8 System Menu>Select Textile Type:
A pre-programmed list of formulae (up to 15 formulae per region) has been default factory set inside the Condor
controller and visible on screen #3.4. These factory defaulted formulae will be automatically loaded to each washer
and synchronized with the Formula Select modules (if installed).
If a specific dose amount needs adjustment, select the <Edit> key on screen #3.9.1. If a formula is modified here, it
will be loaded to all formulae in ALL washers. These amounts can be adjusted using the Left/Right keys.
Use Left/Right arrow keys to adjust formula amounts.
Press SK#3 <Save> to save selection.
Press <Back> to cancel selection.
System Menu #3.0
1. Washer Settings
2. Detergent
3. Bleach
4. Finish
5. Optional Form Select
6. Optional Solid Product4
7. Optional Liquid Product
8. Select Textile Type
9.Reset Setup Menu
10. Reset All
Setup Menu >Select Textile Type #3.8
1. WHITE TOWELS
2. White Sheets
3. Blankets
….
15. Color Table
Setup Menu >TextileType>White Towels #3.8.1
1. SURGE PLUS <5.10>
2. Stain-A-way <0.70>
3. LT ClearlySoft <2.00>
8. SELECT TEXTILE TYPE
1. WHITE TOWELS 1. SURGE PLUS <5.10>
2.3.9 Submenu #3.9 System Menu>Reset Setup Menu
This function will reset the Setup Menus to factory settings, including textile type, formulae, and dose amounts.
Reset the Setup Menus to factory settings, including textile type formulae, and dose amounts.
Confirm your selection using SK#2 (No) or SK#3 (Yes).
Press <Back> to return to the previous screen.
To Next Page
Loading...
