Ecolab Aquanomic - Page 54

54
Test Pick-up Probe – outside container (empty)
2.8.3. Submenu #8.3 Diagnostics>Condor Controller>LCD Test
This submenu allows the user to perform diagnostic testing of the Condor Controller and its internal components.
Diagnostics>Condor Controller #8.3
1. LCD TEST
2. Alarm Test
3. Front Key Test
1. LCD TEST
Diagnostics>Condor Controller>LCD Test #8.3.1
Press a key below to change the screen to the specified
color
Diagnostics>Condor Controller #8.3
1. LCD Test
2. ALARM TEST
3. Front Key Test
2. ALARM TEST
Diagnostics>Condor Controller>LCD Test #8.3.2
Press On to turn Alarm on
Diagnostics>Condor Controller #8.3
1. LCD Test
2. Alarm Test
3. FRONT KEY TEST
3. FRONT KEY TEST
Diagnostics>Condor Controller>Front Key Test #8.1.3
Press a soft key to test. The key name should appear
below. Press Back twice to return to previous screen
Diagnostics Menu #8.0
1. WE components
2. Product Probes
3. Condor Controller
3. CONDOR CONTROLLER
Screen
Description
8.0
Diagnostics Menu
The Diagnostics Menu consists of 3 sub-menus allowing for functional verification of all modules
connected to the Condor controller, and all discrete components controlled by the I/O board
(water valve, product valves, machine valves, etc).
<ENTER>
Proceed with Condor Controller diagnostics
8.3
Condor Controller Diagnostics
LCD – choose a background color to test the Condor display
Alarm – Turn on/off audible alarm
Front Key – when a soft key is pressed, the name of the key will be displayed on the Controller
<ENTER>
Proceed with the highlighted test
8.3.1
Choose a soft key to test the Condor Display (Red, Blue, Green)
8.3.2
Use soft keys to turn audible alarm on or off
8.3.3
Press various softkeys and observe display on Condor Controller