68
5. If the command fails to process, the Condor will notify the user of the failure. Try repeating the command. If still
unsuccessful, call Ecolab Territory Manager for troubleshooting.
6. If the command is successfully processed, the main idle screen on the Condor will update to show the formula as
active underneath the machine it was selected for.
7. The Formula Select module (if installed) will also update to reflect the selection on the Condor:
8. To modify or cancel the formula after it has been selected, highlight the washer using the Left/Right arrow keys
and press the Modify Formula soft-key.
To Next Page
Loading...
