69
9. Use the Up/Down arrow keys to highlight a selection. From here, the formula can be cancelled.
10. If the formula is cancelled, the selected formula F03 for this washer will be reset to F00 and all doses will be
removed from the system queue. The main idle screen on the Condor controller and the Formula Select will
display F00 No Program. Note: if this is done during the middle of a formula, it will result in a Formula not
Finished Error.
Selecting a Wash Formula: MicroMode
If the washing machines are set up in MicroMode, manual formula selection is not necessary. The washing machine
will send the timed pre-programmed signals directly to the dispenser, automatically selecting the correct wash
formula.
If Formula Select modules are installed, the display will show the washer in “Automatic Mode” on the top line.
The formula selection menu on the Condor can be accessed as described in the previous section. However, a formula
cannot be selected using the manual keypad. The Center <Enter> key is now disabled.
To Next Page
Loading...
