9
Choosing SK#2 System Queue will show all of the dispenser’s chemical requests in the order that they will
be dosed.
Choosing SK#3 Load Counts will list production load counts for all, or each, of the washers.
Use the Left/Right arrows on the keypad to highlight/select any of the washers. This will update the soft
key options.
For example, Washer 1 is highlighted using the Left/Right arrow keys. Four soft keys are now made
available.
Choosing…
SK #1: Home – navigates back to the main idle screen
SK #2: Select a Formula – prompts user to select a formula for Washer 1
SK #3: Load Counts – displays load counts for Washer 1
SK #4: Info – displays more information for Washer 1
When a machine is being actively serviced, the Condor will indicate this by displaying this icon above the
active washer
To Next Page
Loading...
