10
Select Formula (SK#2)
Selecting SK#2 opens a list of the pre-programmed formulae available.
Use the Up/Down arrow to highlight a formula.
Press center <Enter> to select the formula.
If Formula F03 Healthcare Linen is selected, the controller will momentarily display the screen below while
the command is processed.
If the formula selection is successfully processed, the Formula Select module for Washer 1 (if
installed) will update to show F03 Healthcare Linen.
The Condor Controller will then display F03 underneath Washer 1 on the main idle screen.
To Next Page
Loading...
