5.
Press the button.
ð
Settings are saved, and the screen returns to the overview: [Operating mode].
6.
Go to [Main menu] by pressing the button .
Set [Operating mode] - [current]:
1. Open the main menu.
2. [Operating mode] - [current] .
3.
Press the Next button.
ð
Screen change for the current setting:
4. Use the scrollbar to scroll to the next page.
5. Select the [variable] .
6.
Press the Next button.
ð
Screen change for the power setting [Set current limit 1].
7. ‘mA’ in the decimal places using the scrollbar.
8. Select the field for entering the value after the decimal point.
ð
The colour changes to dark blue, which indicates that the field is ready for input.
9. Set the decimal point with the scrollbar
.
10.
Press the Next button.
ð
Screen change for the power setting [Set current limit 2].
11. ‘mA’ in the decimal places using the scrollbar.
12. Select the field for entering the value after the decimal point.
ð
The colour changes to dark blue, which indicates that the field is ready for input.
13. Set the decimal point with the scrollbar
.
14.
Press the
button.
ð
Settings are saved, and the screen returns to the overview: [current].
15.
Go to the menu [Operating mode] by pressing the button .
16.
Go to [Main menu] by pressing the button .
5.2.3.4.3 [Operating mode]
- [Timer] einstellen
Set [Operating mode] - [Timer] [Weekly programme]
1. Open the main menu.
2. [Operating mode] - [T
imer] [Weekly programme] .
3.
[Next button] .
ð
Screen change to the selection of the timer interval (weekly programme)
4. [Seven-day programme] .
ð
Screen change to the selection of the ‘
Time’ - [Seven-day programme]
5. Select timing (up to seven dif
ferent weekly programmes are possible)
ð
The screen changes to the setting ‘Timer 1’: ‘Switching point’
6.
Press the
button to close the weekly programme without saving.
ð
The screen switches back to the [Operating mode] .
7. Use the scrollbar to set the time/hours.
8. Select time / minutes.
Comissioning and operation
48417101656 Rev. 01-10.2019
To Next Page
Loading...
