417102233 Betriebsanleitung EMP III E00, E10
1 General
This Operating Instruction contains all the necessary instructions for the installation, start-up,
maintenance and repair of ELADOS
®
EMP III electrical motor-driven metering pumps.
NOTE
The German sections of this manual constitute the ORIGINAL OPERATING INSTRUCTION
and take legal precedence.
All other languages are translations of the ORIGINAL OPERATING INSTRUCTION
If you have questions, please contact us as outlined in chapter 1.4 “Contact address”.
1.1 EBS Article numbers
Within this operating instructions article numbers, and EBS numbers are represented. EBS
numbers are Ecolab internal article numbers and used only “concern internal”.
1.2 Transport damage
CAUTION
If the Pump is found to have been damaged when it is unpacked, it should not be installed!
ATTENTION
1.3 Warranty coverage
Operational safety, reliability and performance of this model are only guaranteed by the
manufacturer if the following conditions are met:
• Mounting, connections, adjustment, service and repair are performed by authorized and
trained personnel.
• The diaphragm metering pump must be used according to the specifications in the
operating instructions contained in the delivery scope.
• Only original spare parts must be used for repairs.
• The warranty claim is invalidated if the pump housing is opened.
In addition, the general warranty and service conditions of the company
Ecolab Engineering GmbH are applicable.
1.4 Contact address / Manufacturer
Ecolab Engineering GmbH
Raiffeisenstraße 7
D-83309 Siegsdorf
Telephone (+49) 86 62 / 61 0
Fax (+49) 86 62 / 61 2 35
eMail:
engineering-mailbox@ecolab.com
To Next Page
Loading...
