Ecolab Elados EMP III-E10 - Emphases; Numberings; Safety; Safety Notes

417102233 Betriebsanleitung EMP III E00, E10
- 31 -
Rev. 02-11.13
2 Safety
CAUTION
The safety Notes and emphases must be observed at all times!
ATTENTION
2.1 Safety notes
• Connection and repair work on the diaphragm metering pump must only be performed by
authorized technical personnel.
• The power supply plug must always be disconnected before starting any work on
electrical components.
• Appropriate protective clothing must be worn for any maintenance and repair work.
• The safety regulations for handling chemicals must always be observed.
2.2 Emphases
The emphases shown here have the following significance:
CAUTION
Used when improper compliance or non-compliance with the operating instructions, work
instructions, prescribed working routines, et cetera, may result in injury or accidents.
WARNING
Used when improper compliance or non-compliance with the operating instructions, work
instructions, prescribed working routines, et cetera, may result in damage to the
equipment.

IMPORTANT
Used when particular attention is required in operating the equipment.
NOTE
Used to draw attention to a noteworthy detail.
2.3 Numberings
 Numberings introduced by the symbol () describe activities to be carried out by the
technician or user.
2.4 Special safety notes for maintenance and repair work
CAUTION
Prior to repair and maintenance work and metering of dangerous media, always rinse the
metering head, relieve the pressure pipe and wear protective clothing (protective goggles,
gloves and apron).
Electronics repairs must only be performed by trained electricians, following the safety
regulations of the professional association VB G 4 & ZH 1/11)!
When opening covers or removing parts, components carrying live voltages may be
exposed. Connection points may also be under live voltages.

IMPORTANT
Only original spare parts must be used for repairs.