Ecolab Lub-O-Mat 2.5 - Fresh Water Connection Setup; Water Inlet Connection Groups; Connection for Single Unit; Connection for Multiple Units

417101637_Lub-O-Mat
- 35 -
Rev. 03-07.12
5.3 Fresh water connection
NOTE
Connect Lub-O-Mat metering stations with fresh water system separation acc. to DIN EN 1717.
Fig. 5.3
Pos Type / description
Order No. / Fresh water inlet:
¾"
1"
1
Bush shut-off, i-i, brass
415502401
415502402
2
Water fine filter
415500813
415500814
3
Pressure reducer
415500629
415500631
4
Manometer, 0-10 bar, G 1/4"
415502560
415502560
5
Bush, brass
415203465
415203466
6
Pipe disconnector
415503434
415503447
1-6
Connection group complete
283037
283038
5.4 Water connection and distributor, input side
5.4.1 Connection group without screw connection coupling for 1 Lub-O-Mat
Fig. 5.4
Pos
Description
Article no.
Water connection, complete, consisting of the following:
283032
1
Transition bend 90° G3/4 IG DN22 VA, 2 ST
415200562
2
Stainless steel pipe Ø22 x 1 0.3 M
415200552
3
90° bend DN20 VA, 1 ST
415031168
The parts are not assembled in the case of supply.
5.4.2 Connection group with screw connection coupling for 1-4 Lub-O-Mat
Fig. 5.5
The parts are not
assembled in the
case of supply.
Pos Description
Connection kit
Article no.
1-way
283007-01
2-way
283007-02
3-way
283007-03
4-way
283007-04
1
Transition sleeve 22 x R ¾" VA
415200584
2 pcs.
3 pcs.
4 pcs.
5 pcs.
2
T piece DN 20 VA
415200569
0 pcs.
1 pcs.
2 pcs.
3 pcs.
3
90° bend DN 20 VA
415200552
1 pcs.
1 pcs.
1 pcs.
1 pcs.
4
Stainless steel pipe Ø22 x 1 VA
415031168
0.5 M
1 metre
1.5 M
2 M
5
Screw connection coupling ¾" i-a VA
415504222
1 pcs.
2 pcs.
3 pcs.
4 pcs.