Ecolab Nalco Water STORM Settling Rate Monitor - Manual Control Screen

STORM™ - SETTLING RATE MONITOR
INSTALLATION, OPERATION & MAINTENANCE MANUAL
ESTDS-STORM-IOM - REV K
Page 16 of 31
Displayed Information
The turbidity probe raw analogue input is displayed as ‘RAW_ IN’.
The scaled turbidity reading is displayed as ‘SCALED’ in mg/L.
Navigation
There are three (3) navigation buttons at the bottom of the screen, allowing the operator to
open other screens;
• Main (Home) screen
• Floc Configuration
• Admin screen