Ecolab Nalco Water STORM Settling Rate Monitor - 3 Scope; Equipment Specification

STORM™ - SETTLING RATE MONITOR
INSTALLATION, OPERATION & MAINTENANCE MANUAL
ESTDS-STORM-IOM - REV K
Page 3 of 31
3 SCOPE
This manual details the operation and maintenance requirements of the Nalco STORM™ Settling Rate
Monitor.
3.1 Equipment Specification
Item
Description
Construction
- Painted stainless steel control cabinet
Electrical
- 90‐264VAC or 180-500VAC, 50/60 Hz, or 24VDC (to be
selected at time of order)
- 6A maximum
- IP66 control cabinet (NEMA 4X)
- Wiring to AS/NZS 3000
Water Supply
- 20 L/min @ 3 bar
- 0.5 L/min (consumed)
Air Supply
- 10 L/min @ 6 bar
Dimensions
- 900 x 600 x 380mm (W x H x D)
Mounting Dimensions
- 950 x 500mm (W x H)
Weight
- Approx. 80 kg
Connections
- Water ‐ 10mm push fit
- Air ‐ 10mm push fit
- Sample ‐ 1” camlock (male)
Sample Line
- Unit supplied with 10 metres of 1” sample hose with
camlock fitting (female)
Outputs
- 2 x 4‐20mA outputs for dosing pump control
- Optional Ethernet port for connection to site PLC/DCS