EcoQuest LaundryPure - Reinstalling the Cover

17
Return the LaundryPure cover to its
original position, fitting the bottom in
place and tipping upward.
Secure with three (3)
screws along the top
edge.
Put the three (3)
remaining screws
along the bottom
edge and tighten.
Return the power cord to the
POWER IN socket located on the
bottom of the LaundryPure.
R E I N S T A L L I N G T H E C O V E R
2
1
3
4
5
Turn on the cold water valve.
Start your washer and check
the system for leaks.
Electrical Shock Hazard.
Do not operate with cover removed.
When working with electrical connections,
the appliance and surrounding area should
be clean and dry of any standing water.
Failure to follow these instructions can result
in death, fire, or electrical shock.
WARNING:
Electrical Shock Hazard.
Plug unit into a 3-prong electrical outlet.
Do not remove ground plug.
Do not use an adapter.
Do no use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
WARNING:
Do not use any cord
other than the power
cord supplied with your
LaundryPure or EcoQuest
replacement cord (item
#US70967). Failure to
follow these instructions
may void your warranty
and/or result in damage
to your unit, fire, or
electrical shock.
CAUTION: