EcoQuest LaundryPure - Before You Start

6
B E F O R E Y O U S T A R T
Remove your new LaundryPure from
its packaging. Inspect for any
shipping damages.
Unplug your
washing machine.
Remove the cold water hose
from the cold water inlet on the
back of your washing machine.
Turn the cold water off
by shutting off the cold
water valve.
To help prevent water spray when disconnecting
hoses, you can relieve pressure in the water line by
momentarily starting your washing machine.
NOTE:
2
1
3
4
Electrical Shock Hazard.
Disconnect power before attempting
installation or service.
Failure to follow these instructions can
result in death, fire, or electrical shock.
WARNING:
Do not remove or disconnect the hot water
line from your washing machine or water
valve. Turn off the hot water valve to prevent
possible leakage. Using the hot or warm water
settings on your washing machine will reduce
the effectiveness of your LaundryPure system.
CAUTION:
NOTE:
Installation procedures may vary according to washing
machine model. If you experience installation problems, visit
www.EcoQuest.com/LaundryPure for more information.