Ecostrad iQ Ceramic - Technical Information

6
• Do not operate the device when wet. If the device gets wet during cleaning,
allow it to dry out before using.
• Do not expose the device to water jets.
• Do not transport the device during operation.
• Do not sit on the device.
• Do not overload the socket used to power the device.
• Before carrying out maintenance, care or repair work on the device, ensure
the device is unplugged. Do not use the cable to tug the plug from the socket.
Hold the plug by its housing and pull.
• Switch the device off and disconnect the power cable from the mains socket
when the device is not in use.
• Allow the device to cool down before touching or transporting the device, or
attempting maintenance work.
• The device must be placed where the switches and controllers cannot be
touched by a person in a bathtub or shower.
2 | Technical Information
Heating element
Ceramic core
Voltage 230V~/50Hz
Wattage 500W, 1000W, 1500W, 1800W, 2000W
Temperature setting
Range
Resolution
7–30 °C
0.5 °C
IP rating
IPX0
Appliance class Class II
Power cable length
1.5m
Motion sensor (5.8G band)
Operation frequency
Max RF power transmitted
5725-5875MHz
5.28 dBm (3.37mW) < 13.98dBm (25mW)
WiFi frequency (2.4G band)
Operation frequency
Max RF power transmitted
2400-2483.5MHz
17.21dBm (52.6mW) < 20dBm (100mW)